Skip to main content
OTA NOTICE
GV60

GV60 (JW PE) Dec. 2025 OTA Software Update

2025.12.16

Dear GV60 (JW PE) drivers.

OTA software update designed to add new convenience features will be released in sequence from Dec.17, 2025.
As the OTA software update is to be performed sequentially, update start and finish timing may vary from vehicle to vehicle.

■ Update release date : December 17, 2025 ~

■ Applicable vehicle: GV 60 (JW PE)

■ Update highlight



OTA Software Update
CATEGORY VEHICLE DESCRIPTION
Vehicle Charging
Management
System(VCMS) Update
GV60
(JW PE)
When using the smart-controlled AC charger, battery information is transmitted externally through the charging connector only from vehicles of customers who have consented to the Ministry of Climate, Energy ,Environment’s Privacy Policy, as well as enabling control of the target SoC.

The battery information sent externally is encrypted and transmitted to the Ministry of Climate, Energy, Environment’s Website server(ev.or.kr). It is used solely within the scope of managing electric vehicle battery safety and operating electric vehicle subsidy policies by the Ministry of Climate, Energy , Environment and the Korea Environment Corporation1.

1Korea Environment Corporation.: A government-affiliated agency that contributes to environmentally friendly national development by effectively promoting the transition to a carbon-neutral society through greenhouse gas reduction projects and other efforts aimed at preventing environmental pollution, improving the environment, promoting resource circulation, and responding to the climate crisis.


※ Offline updating in a Hi-Tech Center may incur additional charges.



[Notes on over-the-air (OTA) update]


  • 1. If the battery has been removed and then attached, you can update the vehicle after turning off the ignition, disconnecting the power from the additionally installed dash cam, etc., and parking for more than 4 hours.

  • 2.If any product is connected to the vehicle OBD terminal, the update function will not work due to interference in the vehicle internal communication.
    After disconnecting the device from the vehicle OBD terminal, turn on the engine and wait for at least 30 minutes, then turn off the engine.
    (Do not connect any device to the OBD terminal during the wireless update.)

We hope the vehicle system update will make your driving experience more convenient and safer!

Thank you.